Connect one end of the cable to the output control cable connector on the cylinder and the other end to the output control cable outlet on the back of the electric box and tighten.
The connection surface of the welding head is wiped clean, connected with the transducer of the vibration cylinder, and the wrench is locked tightly. Note: When connecting, you must ensure that the welding head and the transducer between the two connecting surfaces, and lock tight. Not because the connection screws too long or slippery teeth can not lock the phenomenon, otherwise the sound wave transmission is not smooth and cause damage to the machine.
Loading and unloading welding head must use two wrenches will be welded and transducer respectively jammed, not only one part of the card locking or loading and unloading, so as not to cause the damage of the hand-made vibration tube.
Check 1, 2 points after installation, the power cord socket plug in the external power outlet, and flip the power switch, when the power indicator light.
Light pressure sound wave control switch, at this time can hear the sound waves passed to the solder head when the "squeak" sound, indicating that the machine works properly, you can put into use.
When the machine is abnormal in work, do not disassemble the equipment privately, please inform the supplier or send the equipment to the manufacturer for inspection and repair.