The cleaning method of ultrasonic cleaner is more than the usual cleaning method, especially the surface of the workpiece is more complex, such as some mechanical parts with uneven surface, blind hole, and some very small products with high requirements for cleanliness, such as clocks and precision machinery, electronic components, circuit board components, etc. The use of ultrasonic cleaner can achieve very good results.
The principle of cleaning the ultrasonic cleaner is the high frequency oscillating signal produced by the ultrasonic generator, which is transmitted through the transducer to high frequency mechanical oscillation and propagates into the medium - cleaning solvent. The ultrasonic wave has the same forward radiation in the cleaning liquid to make the liquid flow and produce tens of thousands of tiny bubbles.
These bubbles form and grow in the negative pressure region where ultrasonic waves propagate longitudinally, and close rapidly in the positive pressure zone. In the process of the "cavitation" effect, the bubble closure can form the instantaneous high pressure of more than 1000 atmospheric pressure, and continuously produces instantaneous high pressure like a series of small "explosions" to continuously impact the surface of the object, making the surface of the object and the dirt in the gap exfoliate quickly, thus achieving the purpose of the surface purification of the object.
Technical features of ultrasonic cleaner cleaning agent
The cleaning effect is good, the cleanliness is high and the cleanliness of all workpieces is consistent.
The cleaning speed is fast, the production efficiency is improved, and the cleaning solution is not required to be contacted manually.
The concealed place of deep holes, slits and workpieces can also be cleaned.
The ultrasonic cleaner does not damage the surface of the workpiece, saving solvents, heat energy, workplaces and labor.