The ultrasonic cleaning machine can replace the traditional cleaning process of strong acid and alkali, which can reduce the production cost and meet the requirements of the state to reduce emissions and protect the environment. Ultrasonic cleaning machine can complete the general traditional cleaning process can not complete the product cleaning, such as the blind hole and the gap between the cleaning, the residual liquid often use the general cleaning method is difficult to clean, and the use of ultrasonic cleaning is easy to clean.
Before using the ultrasonic cleaning machine to clean the roller plastic box, in the past each class used kerosene only to clean 1000 plastic boxes with rollers, and the dirt near the four bottom corners of the plastic box was difficult to clean, and the use of kerosene to cause an allergy appearance to the workers' skin. The exclusion of oil pollution causes pollution to the environment and does not meet the requirements of environmental protection.
Now the ultrasonic cleaning machine has been well applied in the roller plant of our factory. Ultrasonic cleaning of plastic box, its biggest advantage is good cleaning effect, can complete the general cleaning machine can not finish the workpiece cleaning. In the past, every class in the past can only clean 1000 boxes, and now the ultrasonic cleaning machine can clean 8 boxes per minute, and the fastest speed can be adjusted to about 14 boxes per minute.
An ultrasonic cleaning machine can clean 3500 plastic boxes everyday, and the labor intensity is greatly reduced. The plastic box cleaned with ultrasonic is very clean, the efficiency of cleaning the plastic box with it is about 3.5 times. It fundamentally solves the problem of manual cleaning in the past, improves the production efficiency and quality, reduces the pollution, is beneficial to environmental protection, saves a lot of energy, makes the production site more clean, and makes the production site cleaner. People's health is effectively protected. The cleaning of plastic boxes avoids dirt from adhering to roller surfaces and achieves cleaner production.
The need to improve in the future is to study whether the cleaning speed of the ultrasonic cleaning machine can be stepless speed regulation, so that the unit can adjust the cleaning speed according to the requirements of the cleaning degree of the plastic box. In addition, the problems that should be paid attention to by using ultrasonic cleaning plastic box are: to clean up the oil and sewage every day, so as to ensure the clean water quality to meet the national standard of discharge.