Hangzhou Success Ultrasonic Equipment Co.,Ltd.
Categories
Contact Us
Add: No.16,Shangsong South Street, Shouxiang Town, Fuyang, Hangzhou, Zhejiang, China (Mainland)
Tel: +86-571-23236732
Fax: +86-571-62058173
Mobile: +86-15088691953
E-mail: sales@fycg.com
News
Home > News > Content
The Composition Of Ultrasonic Cleaning Machine.
Apr 14, 2018

The core part of cleaning equipment is ultrasonic cleaning machine, which is mainly composed of ultrasonic cleaning tank, ultrasonic generator and ultrasonic oscillator. The cleaning tank is the cleaning place of the cleaning material. There is an ultrasonic vibrator installed in the groove, and the cleaning agent is added when cleaning the work. Ultrasonic generator is the power supply of output ultrasonic. The ultrasonic oscillator is the component that produces high frequency vibration through the supply power of the ultrasonic generator. There are three types of common structures for industrial ultrasonic equipment:

1. Directly install the oscillator type.

The vibrator is directly installed on the bottom plate of the cleaning tank (according to the different washing purposes, it can also be installed on the side of the washer) to install the vibrator type cleaner directly. This type of cleaning machine is simple to construct, but it is very troublesome to repair and replace the operation when there are some vibration failures, especially for large equipment. As a result, only small power desktop devices are used to install vibrators in this way.

2. Input vibration box type.

Install the ultrasonic vibrator inside stainless steel box, and then its welding closed, then installed on the cleaning trough (according to wash the purpose which can be installed at the bottom or side) or laptop into the cleaning tank, through which to spread vibration cleaning cleaning fluid. Internationally, large equipment, ultrasonic cleaning machine is generally adopt the types of it has the advantage of low noise, convenient maintenance operation (the user can easily will be sent to manufacturer maintenance vibrator box after unloading). Of course, the cost of the cleaning machine is slightly higher than that of the direct installation of the oscillator type.

3. Vibration plate type

Install the vibrator on a stainless steel plate and hold it to the bottom of the clean trough. The features are similar to the input oscillator box. But as a result of the vibration plate production and high requirement of seal, threaded holes in the process of repair replacement job is tedious, so China's main manufacturing ultrasonic cleaning machine structure is given priority to with 2.1, 2.2, two.


  • Newsletter
  • Categories
  • Contact Us
    Add: No.16,Shangsong South Street, Shouxiang Town, Fuyang, Hangzhou, Zhejiang, China (Mainland)
    Tel: +86-571-23236732
    Fax: +86-571-62058173
    Mobile: +86-15088691953
    E-mail: sales@fycg.com
  • QR Code
  • Copyright © Hangzhou Success Ultrasonic Equipment Co.,Ltd All Rights Reserved.