Hangzhou Success Ultrasonic Equipment Co.,Ltd.
Categories
Contact Us
Add: No.16,Shangsong South Street, Shouxiang Town, Fuyang, Hangzhou, Zhejiang, China (Mainland)
Tel: +86-571-23236732
Fax: +86-571-62058173
Mobile: +86-15088691953
E-mail: sales@fycg.com

Ultrasonic Cutting Machine

Raw Rubber Ultrasonic Cutting Machine

Raw Rubber Ultrasonic Cutting Machine

Cutting principle:Through a set of electronic system to drive a cutting tool, cutting tool in the cutting process will form high-frequency vibration to destroy the molecular structure (vibration frequency can reach 20,000-40,000 times per second), and ultimately achieve cutting effect....
Send InquiryChat Now

Ultrasonic Raw Rubber Cutting Machine

   Rubber ultrasonic cutting machine is completely different, it is through the energy of ultrasound, will be cut material local heating melting, so as to achieve the purpose of cutting materials. Therefore, ultrasonic cutting does not need sharp edges, nor does it need a lot of pressure, and will not cause the material to be cut to collapse and damage. 

     At the same time, due to the ultrasonic vibration of the cutting tool, the friction resistance is very small, and the cutting material is not easy to adhere to the blade. This is especially effective for viscous and elastic materials, frozen materials, such as food, rubber materials, inconvenient pressurized objects, etc. Ultrasound cutting also has a great advantage, that is, it can melt the cutting part at the same time, and seal the cutting part, which will not cause textile material flying edge. Ultrasound cutter is a cutter which loads the ultrasonic energy directly on the cutter, and the cutter becomes a cutter with ultrasonic wave. When cutting material, the material is mainly softened and melted by ultrasonic energy. 

     The cutting edge of the cutter only plays the role of seam location, ultrasonic energy output and separating material. This cutting method is suitable for cutting materials with rough, thick and long cutting boards which are inconvenient to set. Such as raw rubber cutting, pipe cutting, frozen meat, candy, chocolate cutting, cake cutting, printed circuit board and so on.

14

Advantage:

1. during the whole cutting process, the vibration frequency of the cutter is kept and the energy will not decay.

2. cutting process hardly generates heat, and the temperature usually stays below 50 degrees.

3. the cutting face is smooth and smooth, which is suitable for fitting.

There are many kinds of 4. knives, suitable for cutting various kinds of rubber.

5. the cutting angle can be larger and the thicker material can be cut.

6. the cutting method is not single, according to the needs of customers can meet different cutting methods.


12 16

40Khz / 20Khz

Sonic Power: 600-2400w /1200w-4800w

Max cutting width: 800-2000 mm

Max cutting thickness: 25-50 mm

Cutting angle: 18°-30°

Electric power: 750w

2019

Add: No.16,Shangsong South Street, Shouxiang Town, Fuyang, Hangzhou, Zhejiang, China (Mainland)
Skype: cui.yang10
Fax: +86-571-62058173
Mobile: +86-15088691953
E-mail: sales@fycg.com


Hot Tags: raw rubber ultrasonic cutting machine, China, suppliers, manufacturers, factory
  • Newsletter
  • Categories
  • Contact Us
    Add: No.16,Shangsong South Street, Shouxiang Town, Fuyang, Hangzhou, Zhejiang, China (Mainland)
    Tel: +86-571-23236732
    Fax: +86-571-62058173
    Mobile: +86-15088691953
    E-mail: sales@fycg.com
  • QR Code
  • Copyright © Hangzhou Success Ultrasonic Equipment Co.,Ltd All Rights Reserved.