When Using The Ultrasonic Welding Machine, How To Adjust The Ultrasonic Welding Machine Frame?

When using the ultrasonic welding machine, how to adjust the ultrasonic welding machine frame?

Nowadays, many high-tech products have appeared in people’s production and life. These high-tech products have been applied to all walks of life according to their own characteristics, which have brought great convenience to people’s lives and greatly promoted my country’s science and technology. development of.

Ultrasonic welding machines have been widely used in the welding industry, so everyone knows how to adjust the ultrasonic welding machine frame when using the ultrasonic welding machine?

Height method of ultrasonic welding machine frame:

1. Adjust the air pressure to a pressure higher than 1.5 kg

2. Press the ultrasonic mold drop switch once to self-lock position, and the ultrasonic mold is falling

3. Put the ultrasonic bottom mold on the worktable under the frame of the ultrasonic welding machine, and loosen the handle of the lock frame

4. The hand wheel for adjusting the height of the oscillating machine makes the ultrasonic mold and the top surface of the plastic part coincide and interfere, lock the frame, and fix the bottom mold with a splint

5. Retract the falling stroke adjustment screw by 1~2 mm, and lock the screw with a nut

6. Press the mold drop switch of the ultrasonic welding machine again to cancel the self-locking position. At this time, the ultrasonic mold returns to the suspended state